繁體中文
ENGLISH
Pocket Hawk Series
- Optical resolution: Depending on the combination of various slits and gratings.
- PH1014/2014 High sensitivity 3000 pixel CCD sensor
- PH1034/2034 UV enhance 512 pixel CMOS sensor
- Modular configuration with various slit options
- PH101//2014 Minimum Integration times 1.5 ms
- PH1034/2034 Minimum Integration times 0.1 ms
PH Series spectrometer is built with the linear CCD array sensor and 32bits RISC controller. By simplification of the optical engine and specific sensor, the further miniaturized spectrometer is achieved.
External MB type of PH Series can be chosen to enhance heat dissipation. The compact size and various of screw holes is very flexible for system integration.
PH Series spectrometer is constructed by the Crossed CzernyTurner optical design and can provide the high optical resolution, high sensitivity, low stray light, and fast spectral response.
The electronics system is powered by USB port and PH Series communicates with the PC through the USB port. It also provides 8 pin or 4pin I/Os for external interface extension.
External MB type of PH Series can be chosen to enhance heat dissipation. The compact size and various of screw holes is very flexible for system integration.
PH Series spectrometer is constructed by the Crossed CzernyTurner optical design and can provide the high optical resolution, high sensitivity, low stray light, and fast spectral response.
The electronics system is powered by USB port and PH Series communicates with the PC through the USB port. It also provides 8 pin or 4pin I/Os for external interface extension.
PH UV-VIS Series：
PH NIR Series：
| SPEC | Content | ||
| PH1014/2014 | PH1034/2034 | ||
| CCD | High Sensitivity 3000 pixel CCD sensor | UV enhance 512 pixel CMOS sensor | |
| Parameters of Optical System | f/#:5, NA:0.1, Focal Length (R1-R2):60-60 (it is recommended that the Incident NA should larger than the NA of spectrometer) |
||
| Dark NoiseUpper Limit) | 40 | 24 | |
| Dynamic Range(avg)*1 | 2200 | 5650 | |
| SNR | 200 | 330 | |
| Spectrometer | Crossed Czerny-Turner Optical Structure 2nd & 3rd order rejection | ||
| Dimension | 65x65x29.8mm3 | ||
| Grating | Various grating options | ||
| Wavelength | 330-1050nm | 200-1050nm | |
| Slit Size | 10, 25, 50, 100, 200um | ||
| Integration Time | 1.5ms | 0.1ms | |
| Wavelength Repeatability | NA | NA | |
| Wavelength accuracy | NA | NA | |
| Resolution(FWHM) | From 2.2nm~12nm，depending on different modular configuration | ||
| Thermal Stability | NA | ||
| Environmental Conditions | Storage | -30℃ to +70℃ | |
| Operation | 0℃ to +50℃ | ||
| Humidity | 0%-90% Non-Condensing | ||
| Interfaces | Micro USB @ 480 Mbps (High speed) | ||
| Input Fiber Connector | SMA905: Ø3.2+/-0.01mm | ||
| Recommend Tightening Torque | 0.15Nm(Mating Part:5mm thick, Flatness 0.1mm, Aluminum sheet) | ||
| Power | Supply voltage:4.75-5.25V | ||
PH NIR Series：
| SPEC | C | ||
| PH2524 | PH2534 | ||
| Sensor | InGaAs linear sensor 128Pixels | InGaAs linear sensor 256Pixels | |
| Parameters of Optical System | f/#:4.5, NA:0.11, Focal Length (R1-R2):39-44 (it is recommended that the incident NA should larger than the NA of spectrometer) |
||
| Dark Noise(Upper Limit) | High Gain | 15 | |
| Low Gain | NA | ||
| Dynamic Range(avg)*1 | High Gain | 6250 | |
| Low Gain | Na(>7200) | ||
| SNR (Single acquisition) |
High Gain | 2000 | |
| Low Gian | 6000 | ||
| Spectrometer | Crossed Czerny-Turner Optical Structure 2nd & 3rd order rejection | ||
| Dimension | 65x65x29.8mm | ||
| Grating | 2 grating options | ||
| Wavelength | 900-1700 | ||
| Slit Size | 50, 100, 200 um | ||
| Integration Time | 100μs ~15sec, depending on the sensor type | ||
| Wavelength Repeatability | +/-0.2nm, (Argon lamp 100 times) | ||
| Wavelength accuracy | +/-1.5nm之內 | ||
| Resolution(FWHM) | frm 5nm~30nm，depending on different modular configuration | ||
| Thermal Stability | <0.069nm/℃ | ||
| Environment Conditions | Storage | -30℃ to +70℃ | |
| Operation | 0℃ to +50℃ | ||
| Humidity | 0%-90% non-condensing | ||
| Interfaces | Micro USB @ 480 Mbps (High Speed) | ||
| Input Fiber Connector | SMA905: Ø3.2+/-0.01mm | ||
| Recommend Tightening Torque | 0.15Nm(Mating Part:5mm thick, Flatness 0.1mm, Aluminum sheet) | ||
| Power | Supply voltage: 4.75-5.25 | ||